Industrial Utility Efficiency    

More Robust VPFlowScope 3-in-1 Flow Meters

VPInstruments announced the VPFlowScope electronics platform has been upgraded providing more robust protection against static discharges and short-circuiting. We implemented a new, ultra-robust Modbus transceiver circuit, which can hold up to ±60V on A and B lines. It can also allow a larger common mode range of ±24 Volts, which makes biasing of your RS485 network less critical. This transceiver was already in use in the VPFlowScope M and has now been integrated into the complete VPFlowScope product line, including the VPFlowScope Probe, DP, and In-line.

 

VPFlowScope 3-in-1 Flow Meters

Features:

  • Protection from overvoltage line faults up to ±60V
  • ±15kV ESD interface pins
  • Extended common mode range: ±24V
  • Guaranteed fail-safe receiver operation

In many industrial devices, for example, compressor controllers and sensors, RS485 transceivers are easily blown by static discharges, especially when connecting wires for the first time without any protection. Therefore, static protection is very important. We also experienced that one of the most common wiring errors is to reverse data and power lines. Connecting the 24V power supply across the data lines of any traditional RS485 port will result in the transceiver chip going up in smoke, which means the end of your VPFlowScope.

All VPFlowScope products are now protected with the new integrated overvoltage protection. The new transceiver will protect your VPFlowScope against incorrect connection to the 24V power commonly found in building automation installations, and the data lines will withstand connection to 24V power indefinitely. The protection is rated for a maximum of ±60V.

About VPInstruments

VPInstruments offers industrial customers easy insight into energy flows. We believe that industrial energy monitoring should be easy and effortless, to enable insight, savings and optimization. VPInstruments’ flow meters are calibrated on state-of-the-art calibration facility. Our calibration equipment is maintained under our ISO 9001 Quality Management System and is traceable to National Standards. Let us open your eyes and start saving energy. For more information, visit www.vpinstruments.com.