Air Compressors

Quite often the typical variability in compressed air flow demand does not proportionately translate into power reductions at the air compressors. This can be a result of numerous problems with the compressed air supply system. It is important to understand the supply-side’s ability to respond to the demand-side of the compressed air system. If the air compressors, on the supply-side, are not able to translate flow reductions into energy savings, implementation of demand reduction projects should be re-evaluated.

In general, this article focuses on the definitions of terms often used to understand centrifugal air compressor performance. Comments are also made on how to measure power consumption. This article is not intended to be an engineering discussion of the various types and designs of centrifugal and other air compressors.

Rotary screw air compressor that makes its own lubricant from the surrounding air delivers oil-free compressed air to an environmental laboratory in Stuttgart, Germany -

Many sensitive sectors of industry require oil-free compressed air. However, meeting this demand is often not as simple as it sounds. One way is to use oil-injected air compressors with downstream air treatment to meet the demand. A second option is oil-free air compressors, which operate without lubricants. Both versions have their own advantages as well as risks. Another alternative is to use rotary screw air compressors that use water as a lubricant.

When some people think about compressed air, they imagine the big, loud, dirty, unreliable machine in the back corner of their facility. Many businesses around the world rely on compressed air, and an unreliable air compressor can mean stopping an entire facility, costing thousands of dollars in lost productivity and repair labor. Additionally, that loud machine in the back corner is also a major energy consumer. So much so that many industry professionals refer to it as the “fourth utility.”

Compressed Air Best Practices® Magazine spoke with Mark Shedd, Head of Oil-free Air, Aggreko Rental Solutions -

There are two distinct compressed air systems in a refinery or petrochemical environment: plant air and instrument air systems. Instrument air systems are almost always 100% oil-free air compressors on both the permanent and temporary systems. The demand for compressed air purity, in instrument air systems, is so high that the permanent install back-up system is usually nitrogen.

Air-operated double diaphragm (AODD) pumps are common to many manufacturing facilities. As estimated by veteran compressed air auditor Hank van Ormer of Air Power USA, approximately 85 to 90 percent of plants in the United States have AODD pumps. They are used for all kinds of liquid transfer applications, like those found in chemical manufacturing, wastewater removal, and pumping viscous food products.

Compressed Air Best Practices® Magazine and the Compressed Air and Gas Institute have been cooperating on educating readers on the design, features, and benefits of centrifugal compressor systems. As part of this series, Compressed Air Best Practices® (CABP) Magazine recently caught up with the Compressed Air and Gas Institute (CAGI). During our discussion, we reviewed some of the things readers should consider when installing a centrifugal compressor system.

Centrifugal compressors are dynamic, and each has a characteristic curve of rising pressure as capacity decreases. Without any control system, the compressor would operate along this natural curve. A centrifugal compressor's flow and pressure are typically controlled by a combination of an inlet control device and an unloading valve (UV).

The introduction of rotary screw air compressors controlled by variable speed drives (VSDs) is one of the best energy efficiency innovations introduced to the industry in the past few years. This style of compressor control can significantly reduce the energy wasted by compressors running in the unloaded condition. But the type of VSD control offered by various manufacturers can differ, and some of these differences can affect the efficiency of the system. This article discusses some little known tweaks to VSD compressor control, including some using hidden features that can sometimes be implemented to enhance the savings gained by the installation of this type of compressors.

Compressed Air Best Practices® (CABP) Magazine recently caught up with the Compressed Air and Gas Institute (CAGI) to discuss variable inlet guide vanes (IGV). The following interview describes how centrifugal compressor efficiency can be improved thanks to recent developments in IGV technology.