Industrial Utility Efficiency
Hitachi Astemo’s efficiency gains will turn into significant cost savings. In this article we outline the savings reported by the client since the changeover was complete. It shows a sizeable reduction in energy costs, air compressor energy costs and maintenance costs to the tune of 21.95%, 24.14% and 24.14%, respectively. Total operating costs to date have dropped from \$1,277,394 to \$941,959 with the new system a decrease of 26.25%.
Reducing energy costs and pollution emissions involves many areas within an industrial facility. My studies have found seven (7) key (or common) areas where low cost practical projects can be implemented. Combined, these projects provide savings exceeding 10% of the annual energy spend with an average payback of less than one year.
How do you test a 747 engine to ensure reliability once it’s airborne at 600 miles an hour?
Compressed Air Best Practices Magazine interviewed Sid Van der Meer (President) and Terry Nickel (Office Manager) of the Northwest Equipment Company.
Compressed Air Best Practices spoke with Jay Hedges (General Manager) of Mattei Compressors.
A four thousand, five hundred and fifty pound (4550 lbs.) race car is running at 170 mph and facing wind resistance of 150 mph. The car then enters a curve creating a three-degree “yaw” (the change in angle from the direction the car is headed and the airstream). The car struggles to maintain speed as the yaw changes and the dynamic downforce load on the car changes. Suddenly, the driver-less car comes to a stop on the stainless-steel track...
