Technology

Often, multiple centrifugal air compressors are set up to simply react to air demand, which requires the system to not only meet the new demand, but also make up for air depleted in the main header. This typically results in too much supply, which results in bypassing the air to atmosphere. The result is wasted energy use.

Long gone are the days when cost and performance could be the only concern for companies manufacturing refrigerated compressed air dryers using refrigerant compressors. In 2019, accelerated governmental (Europe) regulations and a global concern for sustainability have brought new considerations to the table. What is the Global Warming Potential (GWP) of the refrigerants used in dryers and what is their environmental impact?

As demand for compressed air use continues to grow, the future looks bright for distributors who design, sell, install and service compressed air systems. But perhaps only one thing stands in the way of continued growth and profitability for the vast majority of distributors throughout the United States: the shortage of experienced air compressor service technicians.

Brewing is normally broken down into four stages-malting, mashing, boiling and fermenting. The complex chemical processes begin with a few simple ingredients - hops, grain, yeast and water. Recently there have been technological advancements to safeguard that these steps are attained accurately, efficiently and with cost-savings. One particular improvement is the use of nitrogen during the brewing process. The addition of an onsite nitrogen generator allows brewers to reduce their nitrogen costs, eliminate downtime, and reduce safety risks related to bulk gas cylinder delivery and changeouts.

Introduced in the 1960s and operated successfully worldwide, the Heat of Compression (HOC) Desiccant Dryer has been a viable and successful compressed air drying technology for over 50 years.  In our ongoing series on missed-demand opportunities, we’ll discuss basic operating parameters of HOC dryers and shed light on common misperceptions associated with the technology.

For more than 20 years, Hungarian-based Doroti Pack Ltd. has specialized in the production and servicing of state-of-the-art packaging machines. Their focus is on developing, manufacturing, producing and selling premium-quality packaging equipment, including their line of DorPack thermoforming machines which are often used for food products such as fresh meat, fish, dairy products, bakery ware, confectionery and ready-cooked foods. Dorati Pack chose to incorporate Aventics pneumatic components in latest thermoforming machine for optimal productivity and machine longevity.

Experienced auditors become wary when they see desiccant dryers installed in customers’ plants. These dryers are required when a plant needs instrument-quality compressed air, or when compressed air piping is exposed to freezing temperatures. However, while desiccant dryers can gain this level of quality, the energy cost of stepping up from a dewpoint of 35°F to a level of -40°F increases quite considerably. To attempt to reduce the energy costs of drying to these low levels, heated blower desiccant styles may be used. This article describes three common desiccant dryer types, as well as some experiences, good and bad, with heated blower types.

In most industrial plants, data is everywhere. It resides in flow through pipes, pressure in tanks, vibration on rotating equipment, temperatures in heat exchangers, and electrical energy power consumption in motors. If we can acquire this data and make sense out of the patterns we can take actions to make our plants more efficient and reliable.

Compressed Air Best Practices® interviewed Sang Woo Lee, CEO of Coaire Corporation.

I had enough experience with compressors used in refrigeration to see there was a lot of area for growth, particularly with scroll technology given that its an oil-less air compressor in addition to its efficiencies, noise level and ability to offer customers longevity. I also liked that Coaire has a long history of innovative air compressor technology. In 1968, it became the first Korean company to develop and manufacture a reciprocating air compressor. Later, it became the first Korean manufacturer of rotary screw air compressors, which occurred after it established ties with SRM to develop unique airend technology.

After getting its start manufacturing cost-effective products to the healthcare industry, 40 years later, 1888 Mills has become the fourth largest towel manufacturer in the world, and the largest towel manufacturer in the U.S. With facilities in the United States, Pakistan and Bangladesh, 1888 Mills’ towels are used in almost every corner of the world. 1888 Mills is recognized as a leader in innovation in the textile industry and produces 176,000 pounds of towels per week.