Blow-Off Air in Plastic Injection Molding
Over the last several decades, Air Power USA has reviewed many various types of plastic injection molding operations throughout the U.S.
The current cost to operate the compressed air system is \$139,100 annually, and the proposed measures will reduce it by \$50,700 annually. The proposed cost to complete the measures is $47,600 providing a simple payback of 11 months. The cost included in the Action Plan includes engineering, project assistance, services to maintain the gains, and a 10% contingency.
Over the last several decades, Air Power USA has reviewed many various types of plastic injection molding operations throughout the U.S.
Compressed Air Best Practices interviewed Paul Lukitsch. Mr. Lukitsch is the Regional Facilities & Energy Manager for Millipore Corporation.
A recent comparative vacuum technology study performed by Dr. Kingman Yee, as part of a Chrysler Summer Intern Professors Program, found that air consumption could be reduced by 98% when equipping a robot’s end-of-arm tooling with COAXÆ technology and a Vacustat™ check valve.
This stamping plant is a 2.5 million-square-foot facility with over two thousand employees. At the time of the assessment, the plant was processing approximately 1,600 tons of steel per day into automotive vehicle components and parts such as body parts.
This facility processes bulk food ingredients into finished packaged food products. The factory belongs to a division of a large corporation and was spending \$732,342 annually on energy to operate their compressed air system. This system assessment detailed twelve (12) project areas where yearly energy savings totaling \$214,907 could be found with a minimal investment of \$68,350. Due to space constraints, this article will detail only the higher impact project areas. The over-all strategy for improving this air system centers on improving specific power performance of the #3 centrifugal air compressor and reducing over-all demand with compressed air savings projects.
Compressed Air Best Practices® Magazine spoke with Mr. Ed McGovern (VP Sales & Business Development) of PIAB North America.
How do you test a 747 engine to ensure reliability once it’s airborne at 600 miles an hour?
Faced with rising energy costs, a large electroplating company sought to improve the efficiency and reliability of its compressed air system. After getting a quote from their vendor on a new 300-hp compressor to replace an existing unit, the company sought a comparison quote due to the significant investment the new compressor represented. Based on a recommendation from one of their customers, they turned to Scales Industrial Technologies.
In February of 2008, a sugar plant near Savannah, Georgia suffered the ultimate tragedy. Fouteen employees were killed and 40 injured when finely ground motes of sugar dust ignited, setting off a violent blast. If the fatalities and a tarnished reputation weren’t enough, the Occupational Safety and Health Administration (OSHA) then fined the company more than 8 million dollars in workplace violations related to combustible dust.
Industry standards serve a very important purpose for the end users of compressed air equipment. If the standards are well written, they can help to promote the equipment that they govern, as long as the equipment manufacturers properly apply and promote the standards.