Industrial Utility Efficiency

Air Treatment/N2

Leland Brewing Adopts Modular Nitrogen Generation

By Troy Dreier, Senior Editor, Compressed Air Best Practices® Magazine 

A modular nitrogen generation system integrated with compressed air infrastructure enabled on-site nitrogen production, reducing reliance on delivered CO₂ and improving process efficiency. Adjustable nitrogen purity levels (e.g., 99.99%) optimized flow rate and demand matching while maintaining product quality in brewing applications. The implementation demonstrates how scalable nitrogen generation technology can lower operating costs and support growth in small to mid-sized industrial operations.

Read Full Story

Best Practices 2025 EXPO & Conference Show Report

By Troy Dreier, Senior Editor and Brooke Jones, Digital Content Editor, Compressed Air Best Practices® Magazine 

The Best Practices 2025 EXPO & Conference was the busiest one yet, with 89 presentations, 84 exhibitors and nearly 1,000 registered attendees. It included two conference tracks, five workshops and five EXPO classroom pavilions. The event was so big, we’re splitting our show report into three reports to capture all the activity. 
[ Read Full Story ]

The Importance of Compressed Air Quality in Nitrogen Generation Systems for Food Packaging

By Mirko Krebs, President, KSI Technologies

Modified Atmosphere Packaging alters the gas environment inside food and beverage packaging to maintain product freshness and slow degradation and fouling processes. The exact gas mixture used needs to be tailored to the product and can vary significantly. For many products, nitrogen gas is part of the packaging mixture due to its inert nature. 
[ Read Full Story ]

Texas Recycling Plant Saves Water with Air-Cooled Air Compressors

By Troy Dreier, Senior Editor, Compressed Air Best Practices® Magazine

There are multiple compressed air applications in a waste management facility. This new recycling center uses laser-guided optical sorters to divide waste, with no human involvement on the sorting line. Laser optics determine what type of material each scrap is, then compressed air jets maneuver each piece to its collection area. Compressed air also powers handheld blow guns used for cleaning, as well as the bundling and packaging system. 
[ Read Full Story ]

Selecting the Appropriate Nitrogen Gas Purity Level for Your Application

By the Compressed Air & Gas Institute

Producing nitrogen locally is an excellent way to reduce nitrogen costs and ensure a continuous supply of nitrogen gas at the appropriate purity. The ideal nitrogen generation solution varies by application, based on the specific levels of nitrogen purity, flow, pressure and dryness that are required. Environmental factors such as air quality, humidity and temperature also affect the performance of the system.
[ Read Full Story ]

The Industrial Sustainability 2025 Best Practices EXPO & Conference Show Report

By Bill Smith, Compressed Air Best Practices® Magazine

Compressed Air Best Practices® Magazine launched its first event in Europe, the Industrial Sustainability Best Practices EXPO & Conference, in June 2025 in Barcelona, Spain. Designed to educate and connect factories and specifying engineers on the optimization of industrial compressed air, vacuum and cooling water systems, the event featured 12 hours of conference sessions, exhibits and the first Compressed Air Challenge training to take place in Europe. 
[ Read Full Story ]

Cardinal Glass Increases Throughput with Dry Compressed Air

By Troy Dreier, Senior Editor, Compressed Air Best Practices® Magazine

With over 49 locations and 10,000 employees, the company’s Casa Grande, AZ, plant specializes in tempering, taking annealed or raw glass, cutting it to size, running it through a 1,250°F (677°C) oven and then using a pressurized air system to quench the glass and turn it into safety glass. Compressed air powers the plant’s belt systems that transfer materials, the seaming system that rounds the corners and the washer system that cleans particulates off glass before it goes into the furnace.
[ Read Full Story ]

The 2025 AICD Show Report

By Bill Smith, Regional Sales Manager, Compressed Air Best Practices® Magazine

The Association of Independent Compressor Distributors held its annual trade show in Louisville, KY, April 27-29, 2025. Participating distributor members and guests enjoyed the AICD trade show, guest speakers, a golf tournament and a visit to the Louisville Slugger Museum & Factory. This report presents a sampling of the trade show exhibits (by technology, alphabetically) to share company and technology news. 
[ Read Full Story ]

Danmar Industries Custom Engineers for Oil and Gas

By Troy Dreier, Senior Editor, Compressed Air Best Practices® Magazine

The items included three 550 horsepower (hp), oil-flooded, water-cooled, single-stage air compressors with inlet valve modulation capable of providing 1,540 scfm at 165 psi (11.4 bar), two heatless desiccant, 3,138 cfm, 165 psi (11.4 bar) compressed air dryers, and two nitrogen generators for the main station, as well as two smaller air compressors and heatless desiccant compressed air dryers for each of three smaller facilities. Air compressor packages typically meet API 619, but the customer did not request that in this case. The motors, however, need to meet API 547. Air compressor system piping needed to be carbon steel built to ASME B31.3. 
[ Read Full Story ]

IPS Advises Midwest Industry on Compressed Air Efficiency

By Troy Dreier, Senior Editor, Compressed Air Best Practices® Magazine

IPS supplies compressed air to a lot of machinery running outdoors, such as dust collectors and feed mills on grain elevators, as well as to other equipment in environments lower than 32°F (0°C). Temperatures that low require desiccant dryers. Hoffman helps his customers sort out their options and determine which type of desiccant dryer – heatless, heated purge, heated blower purge – is ideal for their needs.
[ Read Full Story ]