Industrial Utility Efficiency

Air Treatment/N2

Leland Brewing Adopts Modular Nitrogen Generation

By Troy Dreier, Senior Editor, Compressed Air Best Practices® Magazine 

A modular nitrogen generation system integrated with compressed air infrastructure enabled on-site nitrogen production, reducing reliance on delivered CO₂ and improving process efficiency. Adjustable nitrogen purity levels (e.g., 99.99%) optimized flow rate and demand matching while maintaining product quality in brewing applications. The implementation demonstrates how scalable nitrogen generation technology can lower operating costs and support growth in small to mid-sized industrial operations.

Read Full Story

Analysis of Current Air Compressors and Dryers in a System Assessment

By Don van Ormer, APenergy

A complete compressed air system assessment should provide detailed information on both the supply and demand sides of the system. The supply-side refers to the equipment supplying compressed air – the air compressor, dryers, filters, piping and storage tanks.  The purpose of this article is to illustrate what information we believe a factory should receive from a supply-side system assessment and more importantly – what information a plant should always know about their compressed air system.
[ Read Full Story ]

NMR Spectroscopy Lab Requires a -112°F Dew Point and Pure Nitrogen

By Rod Smith, Compressed Air Best Practices® Magazine

 

Compressed Air Best Practices® Magazine interviewed Mr. Warwick Rampley, the National Sales Manager for Sydney (Australia) based, Basil V.R. Greatrex Pty Ltd. It’s not every day one is asked to deliver a system able to provide both a reliable compressed air dew point of -80°C (-112°F) and high purity nitrogen.  We work with some excellent technology suppliers and have engineered a rather interesting system.  Although our firm was founded in 1919, this application is one of the most demanding we’ve encountered. Basil V.R. Greatrex is a unique company as we focus only on compressed air measurement, compressed air quality and compressed air efficiency.
[ Read Full Story ]

Regenerative Desiccant Compressed Air Dryers

By Donald White, Chief Engineer, Aircel

Compressed air is dried to prevent condensation and corrosion which can disrupt manufacturing processes and contaminate products. Water is the primary promotor of chemical reactions and physical erosion in compressed air systems. A myriad of desiccant dryer designs have been devised to provide “commercially dry” air, air having a dew point of -40°F or less, to prevent corrosion.  Desiccant dryers use solid adsorbents in granule form to reduce the moisture content of compressed air.
[ Read Full Story ]

BEKO USA Celebrates 25 Years

By Compressed Air Best Practices® Magazine

Earlier this year, BEKO Technologies completed the third renovation of its eight-year-old facility, which provided perfect timing for the company’s 25th Anniversary Event held on September 22, 2016 in Atlanta, GA.  The celebration marked 25-years of operating in the American markets after the German parent company, BEKO Technologies GmbH, first set up shop in the Tulsa, OK area in mid-December of 1990.  This important milestone was celebrated with a guided tour at the newly renovated American headquarters that included new product introductions and live demonstrations.
[ Read Full Story ]

Selecting Purity Levels with Onsite Nitrogen Generators

By David Connaughton, Product Sales Manager,  Parker Hannifin, Gas Separation and Filtration Division 

The useful and various properties of nitrogen (N2) in industrial applications rank it as one of the most specified gases in industry. For the manufacturer, nitrogen options exist in the choice of delivery system, compliance with clean air standards, safety and purity. In researching these choices, manufacturers can accurately select the optimum nitrogen supply required, often at a considerable savings. Selecting purity levels of 99.99% or higher in many industries and applications ads a variety of costs, both financial and efficiency, which may be needlessly incurred.
[ Read Full Story ]

The Advantages of Onsite Nitrogen Generation for Brewers

By: Mike Robinson, Atlas Copco Compressors, LLC.

Made from various combinations of hops, grain, yeast and water, beer is a drink that has been produced for centuries. But while the ingredients are simple, the chemical processes behind the drink are anything but. Through various reactions, barley becomes fermentable sugars that are then digested by the active yeast to produce carbonation and alcohol. Although the basic principles behind brewing are little changed since their advent, the technological aspects are much improved. Today, large stainless steel tanks are used for fermentation and wort aeration, and complex, automated systems help with everything from temperature regulation to bottling.
[ Read Full Story ]

Heatless Compressed Air Desiccant Dryer Calculation Principles

By Donald White, Chief Engineer, Aircel

Adsorption devices are commonly installed in compressed air systems to remove moisture.  Heatless compressed air dyers are the most common type furnished to meet the requirement for -40° F dew point “commercially dry” air, especially in systems of less than 1,000 standard cubic feet per minute (scfm).  Heatless air dryers are pressure swing adsorbers designed to retain the heat of adsorption within the desiccant beds during the drying process.
[ Read Full Story ]

Oversized Dryer Causes Pressure Issues at a Chemical Plant

By Ron Marshall for the Compressed Air Challenge®

A Canadian chemical plant installed a large heated blower-purge style compressed air dryer, years ago, to condition the instrument air system against freezing temperatures.  The dryer selected was oversized for the connected air compressors and had unused on-board energy savings features.  A compressed air assessment revealed the site air compressors and compressed air dryers were running inefficiently and causing in-plant pressure problems.  Repairs to a compressed air dryer and the replacement of aging air compressors and dryers has reduced compressed air energy costs by 31 percent.
[ Read Full Story ]

Refrigerated Dryers Tested by the CAGI Performance Verification Program

By Rick Stasyshan for the Compressed Air and Gas Institute

Compressed Air Best Practices® (CABP) Magazine and the Compressed Air and Gas Institute (CAGI) cooperate to provide readers with educational materials, updates on standards and information on other CAGI initiatives. CABP recently caught up with Rick Stasyshan, Technical Director for the Compressed Air and Gas Institute (CAGI) to provide readers with some insights into the benefits of CAGI’s Verified Performance Program for refrigerated compressed air dryers.
[ Read Full Story ]

Custom-Engineered Instrument Air Dryers for Refineries

By Ramsaran Palaniappan, Atlas Copco Compressors

Atlas Copco has a long history serving the Houston-based energy and chemical industries with custom-engineered packages. The objective of this article is to show just a few examples of the custom applications typically engineered and manufactured in the Atlas Copco Houston operation. Opened in 2012, Atlas Copco Houston produces standard compressed air dryers as well as completely engineered air dryers for all markets. The air flow capacity of the dryers, produced at this location, vary from 5 to 12,750 scfm. This capacity range covers heatless, heated purge and blower purge air dryers.
[ Read Full Story ]