Technology

Safe Compressed Air Drying Systems for Class I, Division 1 Environments

By Jess Elley, Product Marketing Manager, Suburban Manufacturing Group – Tsunami Compressed Air Solutions

Learn how engineers can safely remove moisture from compressed air systems in hazardous environments by eliminating ignition risks through pneumatic controls. This article explores design considerations, performance characteristics and reliability factors for regenerative desiccant dryers operating in Class I, Division 1 locations.

Read Full Story

Sustainability at Millipore

By Rod Smith, Compressed Air Best Practices

Compressed Air Best Practices interviewed Paul Lukitsch. Mr. Lukitsch is the Regional Facilities & Energy Manager for Millipore Corporation.

[ Read Full Story ]

Chrysler Finds Vacuum Savings of $400,000 per Plant

By Josef Karbassi, PIAB

A recent comparative vacuum technology study performed by Dr. Kingman Yee, as part of a Chrysler Summer Intern Professors Program, found that air consumption could be reduced by 98% when equipping a robot’s end-of-arm tooling with COAX® technology and a Vacustat™ check valve.

[ Read Full Story ]

Seven Sustainability Projects: Metering

By Thomas Mort CEM

Reducing energy costs and pollution emissions involves many areas within an industrial facility. My studies have found seven (7) key (or common) areas where low cost practical projects can be implemented. Combined, these projects provide savings exceeding 10% of the annual energy spend with an average payback of less than one year.

[ Read Full Story ]

Displacement Compressor Performance Standards

By Wayne Perry, Technical Director, Kaeser Compressors

If you have ever looked at the small print of a compressor brochure or a CAGI Data Sheet or a compressor technical information page, you have probably seen some reference to one of the above standards. At one time or another, US compressor manufacturers have used these standards to test and report compressor performance. These are referred to as “Acceptance Test” codes.

[ Read Full Story ]

Xcel Energy and Northwest Airlines Partner to Save Energy

Erin Mathe

How do you test a 747 engine to ensure reliability once it’s airborne at 600 miles an hour?

[ Read Full Story ]

Seven Sustainability Projects: Air Compressors

By Thomas Mort CEM

[ Read Full Story ]

PIAB Optimizes Food Processing Vacuum Systems

By Rod Smith, Compressed Air Best Practices®

Compressed Air Best Practices® Magazine spoke with Mr. Ed McGovern (VP Sales & Business Development) of PIAB North America.

[ Read Full Story ]

Assessment Improves Electroplater Production

By Paul Shaw, Scales Industrial Technologies

Faced with rising energy costs, a large electroplating company sought to improve the efficiency and reliability of its compressed air system. After getting a quote from their vendor on a new 300-hp compressor to replace an existing unit, the company sought a comparison quote due to the significant investment the new compressor represented. Based on a recommendation from one of their customers, they turned to Scales Industrial Technologies.

[ Read Full Story ]

ISO 8573.1 – Contaminants and Purity Classes

By Dan Ryan, Division Engineering Manager, Parker Hannifin Corporation

Industry standards serve a very important purpose for the end users of compressed air equipment. If the standards are well written, they can help to promote the equipment that they govern, as long as the equipment manufacturers properly apply and promote the standards.

[ Read Full Story ]

Boiler Soot-Blowing in Power Plants

By Hank Van Ormer, Air Power USA

Utilities have been cleaning their boilers for many years using either steam or high-pressure air. In the past, when air was used, due to the size of the boilers and the reasonable quality of fuel used, a relatively small amount of cleaning was required.

[ Read Full Story ]